Stainless Steel Corner Guards, Sheet Metal Wall Angle (Various Sizes and Lots)

Description

Package Quantity
: 1, 2, 4, 10 or 20 Outside Corner Guard(s)
Application
: Wall corner protection from light to heavy impacts. Can be used to protect wall corners in many applications including restaurants, hospitals, airports, hotels and homes.
Specifications
:
Material: 304 Stainless Steel
Finish: #4 Brush
Available Sizes: 1/2" x 1/2", 1" x 1", 1-1/2" x 1-1/2", 2" x 2", 2-1/2" x 2-1/2, 3" x 3", 3-1/2" x 3-1/2"
Length: 48"
Thickness: 20ga, (.038"), 1mm OR 16ga, (.063"), 1.6mm
Hug Edges: No, Yes -- (Hugs Edge are a 3/8" bend along the edges to create a void for adhesive and a close fit for non-smooth walls.)
Notes
:
1. Ships with plastic protective coating on finish side. Remove once installed.
2. Sheared and formed accurately to fit 90 degree corners.
3. Material is food safe and FDA compliant.
Installation
: Can be surface mounted with adhesive, drilled and screwed into wall or adhered with double sided tape. Polyurethane Premium Construction Adhesive works very well. PL Premium is not included in this sale.
Installation FAQs:
Question: How to cut corner guard down to a shorter length?
Answer: First, use a rotary Dremel or right angle grinder with a metal cutoff disk to make the cut. Next, deburr sharp cut edge with a sanding disk or file. Lastly, remove any brown discoloration from cutting with an abrasive scotch pad.
Made in the USA!
Contact seller for other specific required requirements.