Pure Silver Litz Turntable Headshell Lead Wire with Hand-Solder ID1.2 Terminal

Description

Pure Silver Litz Turntable Headshell Lead Wire with Hand-Solder ID1.2 Terminal
High quality
5N Pure Silver
litz headshell lead wire.
30AWG 5N Pure Silver litz wire is the best wire for faster transmission speeds, lossless data and cleaner sound. It's 0.55mm outer diameter, litz construction 7 strands and each strand is 0.1mm diameter 99.999+% Pure soft annealed silver wires in oversized PTFE Teflon insulation. Woven Teflon Litz construction is ideal to deliver RFI and EMI rejection and provides low capacitance. 99.999+% silver transmits electrical signals faster and with less distortion than ordinary OFC wires. High grade Teflon insulation gives a predominant air dielectric and is regarded as the best insulator for bare cable. Our silver is produced using the most up to date continuous casting methods in one of the largest and most stringently tested facilities in the world.
Every piece leadwire is made of 2 pieces transparent 30AWG
5N Pure Silver
wires and litz construction for much more cleaner sound. That's means every one set leadwire we use 8 pieces 30AWG
5N Pure Silver
wires.
The terminal are phosphor copper and 24K gold plated for good electrical conductivity and non-allergy reaction. Terminal was hand-soldered for high reliability . The terminal end is wrapped in color coded shrink tubing, it is used at the cartridge end. And the wire end can been easily connected to headshell or tonearm.
Application:  Connects
cartridge to headshell or tonearm,
terminal
is fitting
diameter about 1.20~1.30mm pins on cartridge.
Length: 2 inches (50mm) long with female connector sockets on each end.
Mount on cartridge according to the color of shrink tubing:
BLUE = LG (left ground)
GREEN = RG (right ground)
WHITE = L (left positive)
RED = R (right positive)
Ships free first class!