Outboard Trim/Tilt Pin Wrench Tool MT0006-32mm x 4mm for Yamaha, Honda, Evinrude

Description

Features:
Welcome-motor
Best store
Outboard Trim/Tilt Pin Wrench MT0006-32mm x 4mm Remove Trim/Tilt Caps, Trim Seals on Hydraulic Cylinders for Yamaha, Suzuki, Johnson, Evinrude, Honda Outboards
Features:
Application--for Trim Caps on ALL SHOWA manufactured Trim/Tilt Units,All Suzuki, Honda,Johnson, Evinrude,ALL Yamaha I4 2.8L (F175-F200),ALL Yamaha VMAX,Yamaha F115-F150,Yamaha 2-Strokes (115-225hp)
Function--To rebuild a leaked device on outboard engine, hydraulic trim and tilt unit .Used to remove and install the Trim and Tilt Caps without damaging it and the steering cylinder
A Must Have--Usually, you will put a little drift into one of those holes in the trim and tilt caps with a hammer. Than,you destroy these cap ,you will thrown them away,which cost a about hundred bucks. So, you really need the pin wrench to help you finish that case with ease
High Quality Material--Made of high hardened 4140 impact grade steel,with silver oxide coating which is rust-resistance and durable to use.Better than OEM.
Satisfaction Guarantee: If you're not 100% satisfied with this pin wrench MT0006, simply return it for a full refund in 30 days, guarantee with 12 months’ warranty
Descriptions:
Outboard Trim/Tilt Pin Wrench MT0006-32mm x 4mm
Used for removing Trim/Tilt Cylinder Caps on ALL SHOWA manufactured Trim/Tilt Units,
All Suzuki, Honda,Johnson, Evinrude,
ALL Yamaha I4 2.8L (F175-F200),
ALL Yamaha VMAX, Yamaha F115-F150, Yamaha 2-Strokes (115-225hp)
Come with 2 sets of pins 4 & 4.5
MIN Pin Strength: -180 ft-lb
Included: 3x 4mm pins; 3x 4.5mm pins
Replacement Pins: AMT0005 - S-4mm
Easy to Use
To rebuild a leaked device on outboard engine, hydraulic trim and tilt unit .
Used to remove and install the Trim and Tilt Caps without damaging it and the steering cylinder
Used with 1/2" socket drive
Yamaha Factory Tool:YB-06175-1A, YB-06548
Package Includes:
1 x 32 mm pin wrench,
3 x S-4mm pins,
3 x S4.5mm pins.
Item Specifics
Brand
WM-Auto
Manufacturer Part Number
WMQP948
Type
Outboard Trim/Tilt Pin Wrench
Material
steel
Compatibility
For Yamaha, Honda, Evinrude, Johnson, and Suzuki Outboards
Warranty
1 Year
Payment
Accepted:
Payoneer
Shipping
Please make sure your shipping address is correct before we ship.
Returns
Return postage is the responsibility of buyer unless the return is a result of our mistake.
And all NON-seller mistake returns for refund are subject to 20% re-stocking fee.
Feedback
We maintain high standards of excellence Four 5-star rating
and strive for 100% customer satisfaction! Positive Feedback
is very important to us. If you are not satisfied with our product or our Service, please feel free to contact us immediately.
Contact Us
Our office hours :
- 9:00 a.m. to 6:00 p.m. (GMT +8) of Monday to Friday
- 9:00 a.m. to 1:00 p.m. (GMT +8) of Saturday
Welcome-motor
Best store
DESCRIPTION
PAYMENT
SHIPPING
RETURN POLICY
CONTACT US
Shop Category
Store Home
Boats Accessories
Ford Tools
GM Tools
Dodge / Chrysler / Jeep
Cummins Tools
Detroit Diesel
Duramax Tools
Polaris Tools
Honda / Yamaha Tools
Hummer Tools
BMW Tools
Other
Hot Item
VCM Muzzler Harness Disable Kit for Honda Acura Pilot Accord Ridgeline Odyssey
USD 57.94
Lower Unit Gear Lube Pump Standard Quart Bottle for All Mercury Mariner Outboard
USD 21.58
21838 Air Line T-Fittings Union Tee for 1/4" Coupler Push-To-Connect Pack of 2
USD 34.98
3/8" Impact Wrench Retaining Ring Clip with O-Ring for Milwaukee Type ( 3 Sets)
USD 25.98
Lower Unit Gear Lube Pump Standar Quart Bottle for Yamaha Johnson Honda Outboard
USD 21.58
Picture
New List Item
4C3Z-6026-CA Oil Supply Rail End Gallery Plug Seal For 1994-2003 Ford 7.3L 2Pcs
USD 59.98
High Pressure Oil Pump HPOP Master Service for 1994-2003 Ford Powerstroke 7.3L
USD 96.00
12MM Rocker Arm Shaft Socket J-44706 J-36003-A For Detroit 60 Series Engines
USD 73.98
10263 Oil Cooler install Kit fits for GM Duramax 6.6L 2500/3500 Diesel 2001-2010
USD 74.98
2241 Front Crankshaft Seal Remover & Installer Kit for BMW N20 N26 Engines
USD 187.98
Help & Info
Payment Policy
Shipping Policy
Return Policy
FAQ
About Us
Outboard Trim/Tilt Pin Wrench MT0006-32mm x 4mm Remove Trim/Tilt Caps, Trim Seals on Hydraulic Cylinders for Yamaha, Suzuki, Johnson, Evinrude, Honda Outboards
Features:
Application--for Trim Caps on ALL SHOWA manufactured Trim/Tilt Units,All Suzuki, Honda,Johnson, Evinrude,ALL Yamaha I4 2.8L (F175-F200),ALL Yamaha VMAX,Yamaha F115-F150,Yamaha 2-Strokes (115-225hp)
Function--To rebuild a leaked device on outboard engine, hydraulic trim and tilt unit .Used to remove and install the Trim and Tilt Caps without damaging it and the steering cylinder
A Must Have--Usually, you will put a little drift into one of those holes in the trim and tilt caps with a hammer. Than,you destroy these cap ,you will thrown them away,which cost a about hundred bucks. So, you really need the pin wrench to help you finish that case with ease
High Quality Material--Made of high hardened 4140 impact grade steel,with silver oxide coating which is rust-resistance and durable to use.Better than OEM.
Satisfaction Guarantee: If you're not 100% satisfied with this pin wrench MT0006, simply return it for a full refund in 30 days, guarantee with 12 months’ warranty
Descriptions:
Outboard Trim/Tilt Pin Wrench MT0006-32mm x 4mm
Used for removing Trim/Tilt Cylinder Caps on ALL SHOWA manufactured Trim/Tilt Units,
All Suzuki, Honda,Johnson, Evinrude,
ALL Yamaha I4 2.8L (F175-F200),
ALL Yamaha VMAX, Yamaha F115-F150, Yamaha 2-Strokes (115-225hp)
Come with 2 sets of pins 4 & 4.5
MIN Pin Strength: -180 ft-lb
Included: 3x 4mm pins; 3x 4.5mm pins
Replacement Pins: AMT0005 - S-4mm
Easy to Use
To rebuild a leaked device on outboard engine, hydraulic trim and tilt unit .
Used to remove and install the Trim and Tilt Caps without damaging it and the steering cylinder
Used with 1/2" socket drive
Yamaha Factory Tool:YB-06175-1A, YB-06548
Package Includes:
1 x 32 mm pin wrench,
3 x S-4mm pins,
3 x S4.5mm pins.
Item Specifics
Brand :
WM-Auto
Manufacturer Part Number :
WMQP948
Type :
Outboard Trim/Tilt Pin Wrench
Material :
steel
Compatibility :
For Yamaha, Honda, Evinrude, Johnson, and Suzuki Outboards
Warranty :
1 Year
Payment
Accepted:
Payoneer
Shipping
Please make sure your shipping address is correct before we ship.
Returns
Return postage is the responsibility of buyer unless the return is a result of our mistake.
And all NON-seller mistake returns for refund are subject to 20% re-stocking fee.
Feedback
We maintain high standards of excellence Four 5-star rating
and strive for 100% customer satisfaction! Positive Feedback
is very important to us. If you are not satisfied with our product or our Service, please feel free to contact us immediately.
Contact Us
Our office hours :
- 9:00 a.m. to 6:00 p.m. (GMT +8) of Monday to Friday
- 9:00 a.m. to 1:00 p.m. (GMT +8) of Saturday
All rights reserved.