Outboard Trim/Tilt Pin Wrench MT0009-35mm x 6mm for Showa,Yamaha, Suzuki, Honda

Description

Application-- Fits the tilt caps on all Showa manufactured Trim/Tilt Units, Yamaha F115-F150 (2004-2010), all Yamaha I4 2.8L (F175-F200), Yamaha 2-Strokes (115-225hp), all Yamaha VMAX, all Suzuki, Honda, Johnson, and Evinrude.
Function--To rebuild a leaked device on outboard engine, hydraulic trim and tilt unit .Used to remove and install the Trim and Tilt Caps without damaging it and the steering cylinder
A Must Have--Usually, you will put a little drift into one of those holes in the trim and tilt caps with a hammer. Than,you destroy these cap ,you will thrown them away,which cost a about hundred bucks. So, you really need the pin wrench to help you finish that case with ease
High Quality Material--Made of high hardened 4140 impact grade steel,with silver oxide coating which is rust-resistance and durable to use.Better than OEM.
Satisfaction Guarantee: If you're not 100% satisfied with this pin wrench MT0009, simply return it for a full refund in 30 days, guarantee with 12 months’ warranty
Outboard Trim/Tilt Pin Wrench AMT0009-35mm x 6mm
#Tilt Cap on ALL SHOWA manufactured Trim/Tilt Units
#Tilt Cap on Yamaha F115-F150 (2004-2010)
#Tilt Cap on ALL Yamaha I4 2.8L (F175-F200)
#Tilt Cap Yamaha 2-Strokes (115-225hp)
#Tilt Cap on ALL Yamaha VMAX
#Tilt Cap All Suzuki, Honda,Johnson, Evinrude
WHY YOU NEED THIS PIN WRENCH????
Usually,you will put a little drift into one of those holes with a hammer
Than,you destroy these cap ,you will thrown them away,which cost a about hundred bucks.
So, you really need the pin wrench to help you finish that case with ease
Come with sets of pins 6mm
MIN Pin Strength:
-180 ft-lb
Included:
3x 6mm pins;
Replacement Pins:
AMT0011 - L-6mm
Easy to Use
To rebuild a leaked device on outboard engine, hydraulic trim and tilt unit .
Used to remove and install the Trim and Tilt Caps without damaging it and the steering cylinder
Used with 1/2" socket drive
Replacement for Yamaha Factory Tool:YB-06548