MVP High Quality 36 Grit Anti-Slip Grip Tape 4" x 60' Flat Black Made in the USA

Description

The picture shows a 2" width tape.
However the listing is for a 4" width tape.
36 grit is coarser than our standard 46 grit. Coarser grit is better when shoes or boots are muddy.
Anti-slip from any direction, wet or dry, cuts risks of slips or falls.
Quick and easy to apply. Installs in seconds on any dry, clean, smooth surface. Just remove the protective liner from the underside to expose the special pressure-sensitive adhesive, then apply in the proper position and roll or press in place.
Economical.
Resistant to solvents.
Durable.
Each piece has a heavy coating of pressure-sensitive adhesive especially formulated for a superior bond to practically any clean, dry, smooth surface.
Indoor and outdoor applications.
Flexible: AST36 bends over sharp 90° angles without fracture. Repeated bending without cracking or failure of bond.
Application: Substrate temperature must be above 50°F.
Temperature Limits: Applied AST36 has a useful temperature range of -40°F to 220°F. However, limited exposure to temperatures above 220°F will not harm AST36.
Steam Cleaning: Applied AST36 will tolerate steam cleaning.
Detergent Cleaning: Applied AST36 will tolerate detergent cleaning.
Environmental Resistance: AST36 is essentially unaffected by climactic exposure and mild acid or alkali exposure under normal conditions.
Shelf Life: AST36 shelf life is two years minimum.
Resistance: Motor Oil – Detergent – Hydraulic Oil – UV Resistance.
Peel Adhesion: MIL-D-17951E(SH): Adhesive strength 0.75 lbs. (minimum) .
MIL-W-5044C: Adhesion lb./in. Width Type IV –3 lbs. (minimum).