-40%
High Quality 5N Pure Silver Litz Headshell Wire Leads 1.3 - 1.4 Cartridge Pins
High Quality 5N Pure Silver Litz Headshell Wire Leads 1.3 - 1.4 Cartridge Pins
High Quality 5N Pure Silver Litz Headshell Wire Leads 1.3 - 1.4 Cartridge Pins

High Quality 5N Pure Silver Litz Headshell Wire Leads 1.3 - 1.4 Cartridge Pins

$ 7.38

Availability: 38 in stock
  • Color: Silver
  • Type: Cartridge
  • Condition: New
  • Brand: Pure
  • Compatible Brand: Universal

    Description

    High Quality 5N Pure Silver Litz Headshell Wire Leads 1.3 - 1.4 Cartridge Pins
    30AWG 5N Pure Silver litz wire
    is
    the best wire for faster transmission speeds, lossless data and cleaner sound.
    It's
    0.55mm outer diameter, litz construction 7 strands and each strand is 0.1mm diameter 99.999+% Pure soft annealed silver wires in oversized PTFE Teflon insulation. Woven Teflon Litz construction is ideal to deliver RFI and EMI rejection and provides low capacitance. 99.999+% silver transmits electrical signals faster and with less distortion than ordinary OFC wires. High grade Teflon insulation gives a predominant air dielectric and is regarded as the best insulator for bare cable. Our silver is produced using the most up to date continuous casting methods in one of the largest and most stringently tested facilities in the world.
    Every piece leadwire is made of 2
    pieces
    transparent
    30AWG
    FURUKAWA 5N Pure Silver litz wires
    and litz construction for much more cleaner sound.
    That's means every one set leadwire we use 8 pieces
    30AWG 5N Pure Silver wire.
    The cartridge connector terminals were made from high quality Sn-P bronze with high conductivity 24K GOLD/PURE SILVER plating
    Sn-P bronze is an elastic copper-based alloy with the requirements of high accurate of dimension, good surface quality, excellent shape of strip and properties for production.
    Dimensions: inside diameter 1.30mm, fits pins 1.3~1.4mm well
    Each terminal end is wrapped in color coded shrink tubing.  Terminals are hand soldered. Color-coded heat shrink is used at the cartridge end,  black heat shrink at the head shell end.
    Application:  Connects 1.3mm pins cartridge to headshell, Color end is fitting diameter about 1.30~1.40mm pins on cartridge,  black end is fitting headshell
    Length: 2 inches (50mm) long with female connector sockets on each end
    Mount on cartridge according to the color of shrink tubing:
    BLUE = LG (left ground)
    GREEN = RG (right ground)
    WHITE = L (left positive)
    RED = R (right positive)