High Quality 5N Perfect Crystal OCC Litz Headshell Lead Wire 1.3 - 1.4 Pins

Description

High Quality 5N Perfect Crystal OCC Litz Headshell Lead Wire 1.3 - 1.4 Cartridge Pins
The 30AWG PERFECT CRYSTAL OCC (PCOCC) wire is 0.55mm outer diameter. It's litz construction 7 strands and each strand is 0.1mm diameter 99.999% 5N PERFECT CRYSTAL OCC (PCOCC) wires in oversized PTFE Teflon insulation for a more cleaner sound. Woven Teflon Litz construction is ideal to deliver RFI and EMI rejection and provides low capacitance. High grade Teflon insulation gives a predominant air dielectric and is regarded as the best insulator for bare cable.
PCOCC is some of the finest copper wires available for audio and lends itself perfectly to the delicate signal transfer between your cartridge and headshell.
Unlike common manufacturing processes, the PCOCC copper wires undergo a tightly controlled and extended cooling process resulting in an ideal, homogeneous structure.
This 5N (99.999%) PCOCC materials is from FURUKAWA JAPAN.
Every piece or leadwire is made of 2 pieces transparent 30AWG PERFECT CRYSTAL OCC (PCOCC) wires and litz construction for much more cleaner sound. Every one set or leadwire used has 8 pieces 30AWG PERFECT CRYSTAL OCC (PCOCC) wires.
The cartridge connector
terminals were
made from high quality Sn-P bronze with high conductivity silver plated, headshell side
terminals are
24K GOLD plating,
Sn-P bronze is an elastic copper-based alloy with the requirements of high accurate of dimension, good surface quality, excellent shape of strip and properties for production. It's excellent hardness, flexibility, transparency excellent introduction, when the temperature is very low power.
Dimensions: inside diameter 1.30mm, fits pins 1.3~1.4mm well
Each terminal end is wrapped in color coded shrink tubing.  Terminals are hand soldered. Color-coded heat shrink is used at the cartridge end,  black heat shrink at the head shell end.
Application:  Connects
1.2mm pins
cartridge to headshell,
Color end is fitting
diameter about 1.30~1.40mm pins on cartridge,
black
end is fitting
headshell
Length: 2 inches (50mm) long with female connector sockets on each end
Mount on cartridge according to the color of shrink tubing:
BLUE = LG (left ground)
GREEN = RG (right ground)
WHITE = L (left positive)
RED = R (right positive)