-40%
Evinrude Johnson V4 Lower Unit 0435474 85HP 90HP 105HP 112HP 115HP 120HP 2.0:1
Evinrude Johnson V4 Lower Unit 0435474 85HP 90HP 105HP 112HP 115HP 120HP 2.0:1
Evinrude Johnson V4 Lower Unit 0435474 85HP 90HP 105HP 112HP 115HP 120HP 2.0:1
Evinrude Johnson V4 Lower Unit 0435474 85HP 90HP 105HP 112HP 115HP 120HP 2.0:1
Evinrude Johnson V4 Lower Unit 0435474 85HP 90HP 105HP 112HP 115HP 120HP 2.0:1
Evinrude Johnson V4 Lower Unit 0435474 85HP 90HP 105HP 112HP 115HP 120HP 2.0:1
Evinrude Johnson V4 Lower Unit 0435474 85HP 90HP 105HP 112HP 115HP 120HP 2.0:1

Evinrude Johnson V4 Lower Unit 0435474 85HP 90HP 105HP 112HP 115HP 120HP 2.0:1

$ 580.79

Availability: 100 in stock
  • Country/Region of Manufacture: United States
  • Condition: New
  • Returns Accepted: ReturnsNotAccepted

    Description

    V4 Evinrude Or Johnson Lower Unit
    20" Shaft Length. One Piece Drive Shaft
    2:1 Gear Ratio... or as it is known .50
    13 Spline Prop Shaft
    Fits 1978-1998 V4 90 Degree Block Motors
    This One From A Low Time 1997 90HP Motor
    THIS LOWER UNIT IS FROM FRESHWATER MINNESOTA!
    This Lower Unit Checks Out Under Pressure In Stages From 2-14PSI
    And Vacuum Checked From 2inHg thru 16 in Hg
    Fresh Water Pump Impeller
    All You Need To Do Is
    Adjust Shift Shaft Per Official Spec For Your Motor
    Bolt It On, Then Top Off With Lube Properly Following Mfg. Instructions
    If Not Mechanically Inclined Please Have A Trained
    Evinrude Johnson OMC Service Tech Do These Things For You
    Shipping Empty Of Lube To The 48 Continental States Only