Baileigh BS-350SA Dual Miter Band Saw 1001570

Description

Baileigh BS-350SA Dual Miter Band Saw
Specifications
Capacity Round (90°/45°/60°/45°L)               10.63”/9.45”/6.3”/8.28”
Capacity Square (90°/45°/60°/45°L)               10.24”/ 8.66”/5.9”/7.09”
Capacity Rectangular (90°/45°/60°/45°L)       13.77”x8.66”/9.45”x6.3”/ 7.3”x4.33”
Blade Size (H/W/L)                                        1” / .035” / 124.5”
Blade Speed (fpm)                                          66-280 variable
Blade Guide                                                    Carbide / Roller
Miter Angle                                                     0 – 60, 45 L deg
Miter Adjustment                                           Dual Swivel Head
Table Height                                                   35”
Descent Control                                              Pressure Assist Hydraulic
Return                                                             Hydraulic
Drive                                                               Gear
Motor                                                              3 hp
Power Requirement                                        220v / 1 phase
Shipping Dimensions (L/W/H)                       72” / 30” / 66”
Shipping Weight                                             1167 lbs
Semi- Automatic down feed and up feed
Hydraulic clamping vise
Cast iron saw head provides rigidity and swivels in two directions, 0-60 degrees (R) and 0-45 degrees (L)
Direct gear drive helps extend saw blade life, and allows saw head to make more accurate cuts and cut faster.
Dual descent modes: 1 -Manual descent mode is operated by pulling down on handle and actuating trigger switch. 2- Hydraulic descent feed can be adjusted by operator.
Powerful coolant pump cools blade and assists chip removal system. We recommend using a petroleum or synthetic based coolant mixture that is typically mixed with water in a 1:10 ratio.
Broken blade tension device shuts down machine if blade breaks.
The gear driven BS-350SA is a 10-1/2" dual miter semi automatic bandsaw and is the perfect saw for cutting at 90 degrees or miter angles. This saw has a dual angle head capable of cutting 0-60 degrees (R) and 0-45 (L), making it one of the most versatile band saws on the market. Quick releases allow the operator to change the miter angle in seconds. The vise clamp uses a hand wheel coupled to a low ratio acme screw for positioning and a quick release and load hydraulic clamping system. Each gear driven semi automatic metal cutting band saw we offer has variable speed, miter heads, and a hydraulic controlled descent device for perfect feeds and longer blade life. Our band saws have DC variable speed drives that offers consistent torque even at slower speeds, which increases blade life. Our band saws are constructed of a heavy cast iron saw head and base and the blades are guided via a tungsten carbide insert offering rigidity and accuracy. Each band saw has a powerful coolant system and a broken blade tensioning device that shuts down the machine if the blade breaks. This machine is perfect for cutting solid bar stock, as well as tubing and pipe. Metal cut easily on the BS-350SA include mild and stainless steel, aluminum, chromoly and bronze. Plastics of many different sorts can be cut on this machine as well.
The BS-350SA series band saws hydraulic descent has a down feed adjustment for feed pressure. The saw head is automatically lifted when the cut is complete and is ready for the next cut. The hydraulic descent has a down feed adjustment for feed pressure. This metal band saw can cut up to 8-1/2"x13-3/4" rectangle. This model has service requirements of 220V, Single Phase, 60 Hertz. The BS-350SA horizontal band saw has a dual swiveling miter head, allowing the operator to miter 60 degrees in one direction and 45 degrees in the other direction. This series of horizontal band saw comes standard with a variable speed drive allowing the operator to fine tune the blade speed from 114' to 262' / min. The BS-350SA metal cutting saw requires a 1" wide saw blade by .035" wall thickness that is 125" long, making this series a very precise miter saw.
ORDERS? QUESTIONS? CALL US 866-532-296 2
Please note this item ships direct from the manufacturer. Lead time may exist. Please call us before ordering to check stock.
We are an authorized distributor for Baileigh products. Please Email me Tom at moore-tool dot com or call me with any questions.
Best regards,
Tom Moore
Moore Tool & Equipment
X