Audio Technica AT-VM95E Dual Moving Magnet Turntable Cartridge

Description

Electronic Express eBay Listing Description
Audio Technica Dual Moving Magnet Cartridge
This VM95 Series cartridge with 0.3 x 0.7 mil elliptical stylus fits half-inch mount turntables. The cartridge’s special coil design delivers a powerful output level of 4.0 mV. It also offers excellent channel separation and low distortion for outstanding tonal quality. The durable, low-resonance housing includes threaded inserts that enable the cartridge to be mounted to the headshell with just two screws – no nuts required. And since all VM95 Series share the same body, the stylus can be replaced with any of the six interchangeable AT-VMN95 replacement stylis.
Key Features:
VM95 Series dual magnet cartridge with 0.3 x 0.7 mil elliptical stylus
Aluminum cantilever
Specially wound coils increase output voltage
Durable low-resonance polymer housing
Threaded inserts in cartridge body enable cartridge to be mounted to headshell with just two screws – no nuts required
Compatible with any AT-VMN95 replacement stylus
Specifications:
Frequency Response:
20-22,000 Hz
Channel Separation:
20 (dB at 1 kHz)
Vertical Tracking Angle:
23°
Vertical Tracking Force:
1.8-2.2 g (2.0 g standard)
Stylus Construction:
Bonded round shank
Recommended Load Impedance:
47,000 ohms
Coil Impedance:
3.3 k ohms (1 kHz)
DC Resistance:
485 ohms
Coil Inductance:
550 mH (1 kHz)
Output Voltage:
4.0 mV (1 kHz, 5 cm/sec.)
Output Channel Balance:
2.0 dB (1 kHz)
Stylus Shape:
0.3 x 0.7 mil elliptical
Cantilever:
Aluminum pipe
Static Compliance:
17 x 10 – 6 cm / dyne
Dynamic Compliance:
7 x 10 – 6 cm / dyne (100 Hz)
Mounting:
Half-inch
Cartridge Weight:
6.1g
Dimensions:
17.2 mm (0.68") H × 18.9 mm (0.74") W × 28.3 mm (1.20") D
Accessories Included:
Two 11 mm installation screws, two 8 mm installation screws, two washers
Model:
AT-VM95E
Mounting Feature:
Half-inch mount
Recommended Load Capacitance:
100 to 200 pF
Replacement Stylus:
AT-VMN95E
Stylus Size:
0.3 x 0.7 mil
Type:
VM Stereo Dual Magnet
Weight:
6.1 g (0.22 oz)
Wire Used for Coil:
T.P. Copper