-40%

2x PRV Audio 6MB550FT Midbass Loudspeakers 6.5" 8 Ohms 1100W + 6GRILL-POLY

$ 105.4

Availability: 54 in stock
  • Refund will be given as: Money Back
  • Condition: New
  • Program Power: 550 Watts
  • Return shipping will be paid by: Seller
  • Nominal impedance: 8 Ohms
  • Brand: PRV Audio
  • Modified Item: No
  • Nominal Diameter: 6″ (152 mm)
  • Type: Mid-Bass
  • Size: 6.5"
  • Voice Coil Diameter: 2″ (51 mm)
  • Speaker Size: 6.5in.
  • Custom Bundle: Yes
  • Model: PRV-6MB550FT + PRV-6GRILL-POLY
  • Rated AES Power Handling (RMS): 275 Watts
  • MPN: 6MB550FT
  • Item must be returned within: 30 Days
  • All returns accepted: Returns Accepted
  • Bundle Description: Two 6MB550FT Speakers With Two 6GRILL-POLY Grilles
  • California Prop 65 Warning: Californians about significant exposure to chemicals that cause cancer, birth defects, or other reproductive harm.
  • Compatible Brand: PRV AUDIO
  • RMS Power: 275W

    Description

    INCLUDES
    :
    2x  6MB550FT 6" MID BASS LOUDSPEAKER
    2x 6GRILL-POLY 6.5" Loudspeaker Grilles
    Features
    PRV Audio’s 6MB550FT 6.5″ Forte Series midbass was specially tailored to give you more Xmax and less distortion on mid-low mid-bass frequencies, with its Peak-to-Peak excursion going up to 14 mm (0.55″) this speaker can give a heck of a punch!
    The tall 2″ voice coil ensures high heat dissipation and the necessary motor strength to deliver high sensitivity even on high power with the minimum distortion with recommended High Pass filter of 95Hz at 12 dB Octave.
    All this attention to detail makes the 6MB550FT one impressive driver. With 94.5 dB efficiency and 550 watts power handling this mid-bass is ideally used in stage monitor, auditorium, touring, and outdoor systems. The smooth response from 85 to 7,500 Hz makes it perfect for 2 or 3-way designs.
    Highlights
    Designed to handle low frequency at a high power output
    Xmax 5.40 mm – 14 mm Peak-to-Peak excursion before damage
    A huge magnet for increased efficiency and control
    High power copper tinsel lead wire
    Vented pole piece minimizes power compression and increases power handling
    Rigid cast aluminum frame can withstand the use and abuse of pro and car audio
    Natural paper cone and double-roll surround for smooth response
    A rigid cast aluminum frame with spokes to minimize reflections back into the cone. To drive the voice coil, a large ferrite magnet is used with a very precise machined top and bottom plate.
    The additional forced vent in the backplate for the coil allows this driver to handle up to 250 watts RMS without issue.
    This midbass will stand up to years of serious professional use!
    Its special composed spider reduces distortion at a high excursion and double roll surround keep cone travel linear at high excursion, while its copper tinsel lead wire is capable of high current transfer makes this driver not only unique but gives all high-performance characteristics and high-quality components providing exceptional clarity, detail, and dynamics sound.
    Its CCAW voice coil has 14.8 mm of winding wire, giving it an incredible 5.40 mm Xmax with the capability of 14 mm Peak-to-Peak excursion before the damage, which allows its cone to travel over 0.55″ giving a heck of a punch.
    Featuring a paper cone has a special high strength paper pulp composition designed to achieve the best possible linearity within the middle frequency range and a special cone treatment specifically dedicated to improving the dampening properties of the moving assembly, thus considerably improving the smooth frequency response.
    Technical Details
    GENERAL SPECIFICATIONS
    Nominal Diameter
    6″ (152 mm)
    Nominal impedance
    8 Ohms
    Rated AES Power Handling (RMS)
    275 Watts
    Program Power
    550 Watts Per Unit
    Sensitivity 2.83V at 1m
    94.5 dB
    Recommended Hi-Pass Crossover**
    **For Full Power Handling
    95 Hz**
    **12db Per Octave Crossover
    Frequency Response at -10dB
    85 – 7,500 Hz
    Voice Coil Diameter
    2″ (51 mm)
    Voice Coil Wire
    CCAW
    Voice Coil Winding Depth
    14.8 mm
    Former Material
    Kapton
    Magnetic Gap Depth
    8.0 mm
    Frame Material
    Die-cast aluminum
    THIELE-SMALL PARAMETERS
    Equivalent Volume
    Vas
    8.23 l
    Excursion (mathematical)***
    Xmax
    5.40 mm
    Free Air Resonance
    Fs
    84.9  Hz
    Mechanical Factor
    Qms
    3.83
    Electrical Factor
    Qes
    0.38
    Total Factor
    Qts
    0.34
    Cone Area
    Sd
    143 cm²
    Mechanical Mass
    Mms
    12.1 g
    Bl Factor
    Bl
    9.77 Tm
    Dc Resistance
    Re
    5.6 Ohms
    Inductance
    Le
    0.424 mH at 1 kHz
    Mechanical Mass Without Air
    Mmd
    11.1 g
    Mechanical Compliance
    Cms
    0.291 mm/N
    6GRILL-POLY 6.5" Loudspeaker Grille
    Features
    6.5″ Loudspeaker Grille
    The grille fits the following PRV models: 6FR200 / 6MB200 v2 / 6MB200-4 v2 / 6MB250-NDY / 6MB250-NDY- 4 / 6MR250B-4 SLIM / 6MB550FT 6MR200A / 6MR250A / 6MR300SEAL v2 / 6MR400-4 BULLET / 6MR500-NDY / 6MR500-NDY-4
    Frame Material: Polyethylene
    Screws included for convenient installation
    Technical Details
    The grille fits the following PRV models: 6FR200 / 6MB200 v2 / 6MB200-4 v2 / 6MB250-NDY / 6MB250-NDY- 4 / 6MR250B-4 SLIM / 6MB550FT / 6MR200A / 6MR250A / 6MR300SEAL v2 / 6MR400-4 BULLET / 6MR500-NDY / 6MR500-NDY-4