1x PRV Audio 15SW2000 Low Frequency Woofer PRO Loudspeakers 15" 8Ohms 2000 Watts

Description

INCLUDES:
1x 15SW2000
15" SUBWOOFER LOUDSPEAKER
Features
The 15SW2000 pro audio subwoofer features a special 4″ split copper wire voice coil wound on a fiberglass former using proprietary high temperature adhesives. It features an optimized ceramic ferrite magnet assembly that will guarantee very good Low dynamic range with a very low distortion figure. This professional low frequency driver is especially recommended for compact vented enclosures, in which it will deliver solid, deep bass output.
Highlights
4″ split copper voice coil wound on fiberglass former for hi-temp performance, 8 ohms
Ventilated voice coil gap reduces power compression
12.5 mm Xmax, 36 mm peak-to-peak excursion before damage
1000 watts continuous program power rating makes high acoustical output
High BL factor and Xmax for outstanding Low output
Weather-resistant paper cone and dust cap
The 15SW2000 loudspeaker has a specially designed forced air ventilation system to ensure proper cooling for long hard play. Our specially designed rigid cast aluminum frame features side forced cooling system openings which allows airflow to cool the voice coil to handle up to 1000 watts RMS without issue. Spring-loaded push terminals make installation a snap while offering a secure connection to your speaker wires.
The cone, constructed of thick paper for natural response, includes glass fiber reinforcement and uses a ribbed design offering additional structural support. The woven surround offers precise movement along its impressive 12.5 mm XMAX. The upgraded and advanced voice coil and cone material along with its ability to reproduce extremely low frequencies will ensure this is your subwoofer of choice to replace your existing drivers.
Supporting the cone is a double silicone spider with optimized compliance and triple roll treated cloth surround, both designed for high excursion applications to handle short bursts of excessive power without damage.
To stand up to the use and abuse of the professional sound environment we designed a 4″ spit copper voice coil that is wound inside-outside on a fiberglass former and features a generous 31 mm winding length for extended Xmax and less distortion.
Technical Details
GENERAL SPECIFICATIONS
Nominal Diameter
15″ (310 mm)
Nominal impedance
8 Ohms
Rated AES Power Handling (RMS)
1000 Watts
Program Power
2000 Watts
Sensitivity 2.83V at 1m
96 dB
Recommended Hi Pass Crossover**
**For Full Power Handling
50 Hz**
**12db Per Octave Crossover
Frequency Response at -10dB
45 – 2,300 Hz
Voice Coil Diameter
4″ (100 mm)
Voice Coil Wire
Copper
Voice Coil Winding Depth
31.0 mm
Former Material
Glass Fiber
Magnetic Gap Depth
12.0 mm
Frame Material
Die Cast Aluminum
THIELE-SMALL PARAMETERS
Equivalent Volume
Vas
61.53 l
Excursion (mathematical)***
Xmax
12.5 mm
Free Air Resonance
Fs
52.9 Hz
Mechanical Factor
Qms
16.54
Electrical Factor
Qes
0.57
Total Factor
Qts
0.55
Cone Area
Sd
908 cm²
Mechanical Mass
Mms
169.1 g
Bl Factor
Bl
23.19 Tm
Dc Resistance
Re
5.5 Ohms
Inductance
Le
1.51 mH at 1 kHz
Mechanical Mass Without Air
Mmd
153.6 g
Mechanical Compliance
Cms
0.053 mm/N
EXTRA INFO
Overall Diameter
15.47”(393 mm)
Front Mount Baffle Cutout
13.98” (355 mm)
Mounting Depth
7.11”(180.5 mm)
Overall Depth
7.68”(195 mm)
Net Weight
25.90 Lbs (11.75 kg)
Shipping Weight
28.66 Lbs (13.0 kg)
Carton Dimensions W x L x H
16.73”x 16.73” x 8.66”
(425 x 425 x 220mm)